TURBIDITY PROBE
NEP-180°
High-sediment (30.000 NTU) 180 degrees backscatter extension for NEP-5000
NEP-180° backscatter probe
- 180° backscatter standard
- 3 preset range groups, custom ranges available and range hopping capability
- Accuracy of ±1% FSO at 25°C all ranges
The ANALITE NEP-5000 with 180 option is a 180° series of digital turbidity probes designed for monitoring applications where very high turbidity values and high sediment loads are a consideration. This probe offers all the features and benefits of its 90° counterpart applied to 180° backscatter technology.
The ANALITE NEP-5000 with 180 option is a series of turbidity probes that offers a multiple range concept in settings and selection. Calibrations can be made for three different levels of usage (Low, Medium and High). These 3 levels of usage for the 180-degree backscatter sensor are offered as versions to simplify range selection and order placement.
Ranges:
- Low range: 0 to 5,000 NTU
- Medium range: 0 to 10,000 NTU
- High range: 0 to 30,000 NTU
The three range calibrations allow for three types of usage modes and linearity from low range to high range in the auto-ranging mode. This applies to event-based sediment studies where NTU readings are prone to peaks above a set range.
Key Features
- 180° backscatter standard
- 3 preset range groups, custom ranges available and range hopping capability
- Accuracy of ±1% FSO at 25°C all ranges
- Various outputs
- Zero drift (less than ±0.2NTU)
- Power: 8-30V DC, 15mA on 40mA reading and 60mA wiping
- Factory calibrated using non-toxic AEPA polymer solutions
Application Areas
- Monitoring of streams, rivers, and water storage
- Intermediate and final effluent treatment monitoring
- Hydrological run off studies
- Ground and bore water analysis
- Drinking water filtration efficiency
- Industrial process monitoring
- Sludge and dredge monitoring
Additional Documents
MADE LIKE NO OTHER
Observator has over 100 years of experience in the development of customised monitoring solutions.